A combination of high quality corrosion inhibitors formulated for the long term preservation of all two- and four-stroke petrol and diesel engines.
300 Millilitres (ML)
For the long-term protection of all two- and four stroke petrol and diesel engines such as passenger vehicle, heavy goods vehicle and boat engines and motorbikes, lawnmowers, snow-clearance equipment, emergency power units and pumps etc.
Preservation is carried out via the carburetor, spark plug hole, injector or glow plug depending on the type of engine.
Two-stroke engines Remove the air filter. With the engine running at low revs, spray Engine Internal Preservative into the carburetor for 10-20 sec., switch off the engine and remove the spark plugs. Spray Engine Internal Preservative into the cylinder for about 5 seconds and turn the engine by hand.
Four-stroke engines Remove, spark plugs, injectors or glow plugs and spray Engine Internal Preservative into the cylinder for 5-10 seconds (depending on the size of engine). Turn the engine by hand or via the starter and replace the spark plugs, injectors or glow plugs.